DCC Configuration
CV 29

Description

CV 29 is the primary configuration register. This CV will control whether you use the long or short address and it's direction.

Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0

NOTE:  Bits 7, 6 and 3 are not used (Reserved) in this CV and are normally set to zero.

Bit 7 Reserved Zero N/A
Bit 6 Reserved Zero N/A
Bit 5 Long Address Short Long
Bit 4 Speed Table No Yes
Bit 3 Reserved Zero N/A
Bit 2 NMRA Digital Yes Analog
Bit 1 Speed Mode 14 step 28/128
Bit 0 Direction Fwd Reverse

Calculate CV Values:

Select bit switchs, then Press Genverate CV value to calculate the 3 digit CV:




Reverse Calc CV Values to Binary:

Enter the CV value in the range of 0 and 255 below: